-
Aluminum ventilation flaps, Ventilation, Ventilation grates
Aluminum ventilation flap Enix KVAL-P
Pirce on request: export@enix.ruПодробнееQuick View -
Aluminum ventilation flaps, Ventilation, Ventilation grates
Aluminum ventilation flap Enix KVAL-PP
Pirce on request: export@enix.ruПодробнееQuick View -
Aluminum ventilation flaps, Ventilation, Ventilation grates
Aluminum ventilation flap with manual drive Enix KVAL-R
Pirce on request: export@enix.ruПодробнееQuick View
- Dilatation ProfilesAluminium and steel profiles for expansion joints
-
- DGK FAS seriesInsertable facade profiles, wind load
- DGK seriesSurface and embedded floor profiles for light foot traffic
- DPP seriesOverhead profiles for expansion joints in parking lots. Intense traffic loads.
- DPS seriesOverhead profiles for expansion joints in parking lots. Intense traffic loads. Speed bump function.
- DPSH seriesEmbedded profiles for expansion joints in parking lots. Waterproofing function. Intense traffic loads.
- DPV seriesWaterproofing overlay profile for the expansion joint. Withstands the loads generated by light vehicles.
- DSHA.T seriesSpecial high-strength profiles with aluminum expansion joints. Corner and straight modifications. Any loads.
- DVS seriesProfile data with composite expansion joints made of aluminum and thermoplastic elastomer are installed by the overlay method and are used to isolate expansion joints in underground and surface parking lots.
-
- DSHA.TS seriesEmbedded and overhead profiles for expansion joints subject to high loads. Corner and straight modifications. Aluminum expansion joints.
- DSHA seriesEmbedded and overhead profiles for expansion joints subject to high loads. Corner and straight modifications. Aluminum expansion joints.
- DSHKA-FAS seriesRecessed aluminum facade profiles with thermoplastic elastomer expansion joints. Wind loads. Width up to 200 mm.
- DSHKA seriesHigh quality aluminum profile with TPE expansion joints. Withstand loads from 3.5 tons vehicle to loaders, depending on the width of the seam.
- DSHL seriesEmbedded profiles for fillet and straight modifications for narrow expansion joints with medium to high loads.
- DSHN seriesReinforced aluminum profiles with EPDM expansion joints. Resistant to acidic and alkaline environments. Withstand the loads generated by cars and trucks.
- DSHO seriesAluminum profiles with TPE compensator specially for the device of expansion joints in shopping and business centers.
-
- DSHS seriesWide profiles for expansion joints up to 400 mm wide. Suitable for deformation purposes as well as for pedestrian use.
- DSHV seriesA wide range of aluminum profiles for expansion joints subject to various loads - from light pedestrian to light vehicle loads. Corner and surface mounting.
- DSHМ seriesEmbedded profiles for expansion joints made of aluminum. Designed specifically for shopping centers and joints up to 75 mm wide. Angular and straight execution.
- DVA seriesProfiles for expansion joints subjected to extreme loads. The profiles of this series can withstand loads up to 20 tons.
- PSA seriesThe profiles of the "PSA" series are designed to cover expansion joints that are not subject to stress. There are both straight and corner modifications for expansion joints from 40 to 190 mm wide.
- TPA seriesEmbedded profiles for concreting shrinkage joints. The width of the profiles is 9 mm.
- TPМ seriesEmbedded profiles for concreting shrinkage joints. The width of the profiles is 11 mm.
-
- Covering materialsAwnings, canopies made of PVC, Tarpaulin, Oxford fabric
- Fiberglass and glass
productsBasalt, Silica, Fiberglass fabrics - Waterstops
- Flat roofsFlat roof accessories
- GeosyntheticsGeogrids, Geotextile, Geomembranes
- Ventilation
- Insulation of construction jointsAll kind of profiles and cords, watertops etc...
- Monolithic construction
components - Thermal insulation
- Ventilation gratesAluminium ventilation grates
- Lumber
- Industrial pumps
- DiscluderFor sealing assembly holes from reinforcement during formwork