Round fiberglass PCT 430L / 1 (100)
$0.78 Price per m²
Rolling GRP PCT 430L / 1 (100) produced on Makhachkala plant. They are used as coating layer in the regeneration of the thermal insulation piping.
- Mass – 430 g / m2 .
The material is non-toxic, non-flammable and non-flammable. Chemical inertness and biological stability with modern twin the fiberglass with thermosetting plastics.
- Description
- Additional information
- F.A.Q.: TERMS & MORE DATA
Description
The main advantages of the PCT-rolled fiberglass 430L / 1 (100);
- material chemically inert to most acids, alkalis and salts, detergent and household pollutants, for most solvents.
- High mechanical strength, higher than that of most polymers and alloys. On the quality of some of the fiberglass can be compared with structural steel.
- In addition to the high thermal insulation properties, they also possess excellent dielectric.
- Fiberglass is not afraid of corrosion, do not rot and does not decompose.
- The material is resistant not only to the impact, but also to vibration loads.
- The share of 5-6 times lower than that of steel. A specific strength – ten times higher .
From minuses consider when machining relatively low modulus of elasticity, sensitive to abrasion and dustiness.
Additional information
| Price ruble | 66.25 |
|---|---|
| Density | 430 |
| Density of threads on the warp | not rated |
| Density of threads on weft | not rated |
| Manufacturing standard | ТУ 6-48-87-92 |
| Operating temperature | -40/+80 |
| Application | Thermal insulation, Thermal insulation of pipelines, Thermal insulation work |
| Edge processing type | Doesn't need processing |
| Roll length | 100 |
| Mark | RST |
| Tensile strength of the base | Not rated |
| Breaking load of weft | Not rated |
| Roll width | 1 |
| Steep | latex |
Briefly about our company: we are a trading company with relatively little experience in international supplies, but striving to enter foreign markets.
We launched an multilanguage export-oriented website in 2021, so many processes (price formation, VAT, delivery time and cost, as well as customs calculators) have not yet been implemented. But all this will be done with pleasure by the managers of our company, if you send us your request for export@enix.ru.
Send a request for the information you are interested in by e-mail export@enix.ru and we will answer you as soon as possible (on average, it takes 2-3 hours during working hours at GMT + 3).
We deliver to the countries of Europe and the CIS countries within 3-4 days after receiving funds or signing a specification providing for a deferred payment.
We will provide samples of our products in almost any direction (except for industrial pumps and other large-sized equipment, of course).
Depending on the type of goods, their quantity and the target country, full or partial prepayment of the goods is possible.
Many of our products are already certified, some of them are in the process of certification or will be certified soon. If you are interested in a permanent partnership or you are interpreted by large volumes of supplies, we will take over the financial part of the certification issue in your country.
Any other questions? - send to export@enix.ru, we are waiting for them
